Suzhou Gansu Glass Products Co., Ltd.
Contact: Xie Bin
Address: Building 1, West Side of Provincial Road 227, Xinzhong Village, Xinzhuang Town, Changshu City, Suzhou
The characteristics of glass products are mainly transparent and open. European and American developed countries developed high-strength tempered glass that can be used for structural support at the beginning of the last century, and widely used frameless assembly technology, which fully reflects the unique characteristics of glass products. effect. Due to the limitations of China's glass processing level and installation level, China still uses the frame method as the main glass fixing method. In fact, China's glass production level has reached the world's leading level, and glass with strength that can fully reach the level of structural parts has been produced With advanced installation technology, it can completely realize the installation of pure glass engineering under any circumstances. At the same time, there are also leading installation technology organizations in the industry that have already successfully solved related issues such as wiring reuse, and I believe that this technology that fully reflects the characteristics of glass products will shine.
Materials include mirror materials, substrate materials, fixed mirror materials, etc.
Mirror materials: mainly flat mirrors made of flat glass, brown mirrors with different shades, and single-piece special mirrors with bump line angles or floral decorations. In addition, patterned glass, frosted glass, spray-painted glass can also be used for decoration on wall posts. Glass mirrors made of high-quality flat glass or brown flat glass through coating can be divided into two types: front-coated mirror and back-coated mirror. Any glass that uses flat mirrors and tea mirrors can be cut at the site according to the specific size required. Generally, the thickness of the glass mirror size can be as small as 3mm, and the large size must be 5mm or more.
Substrate material: is used between the main structure and the glass mirror. Its role is mainly to level the lining and to prevent moisture and shock. The material of the substrate includes square wood (keel) with a size of 40x40 or 50 or 40x50, plywood or fiberboard, and asphalt and linoleum.
Material for fixing glass: It is mainly used for fixing glass and for decorative purposes. There are screws, nails, glass glue, epoxy glue, cover strips (wood or aluminum alloy metal materials), and rubber washers.
Tools include glass cutter, glass drill, diamond, compass machine, compass knife, glass suction cup, spirit level, pallet ruler, wire hammer, steel tape measure, ruler, ink fountain, glass rubber cylinder and screwdriver. Small machines are mainly electric slitters, electric planers, chainsaws and glass suction cups for woodworking. Diamond compasses are used for cutting lenses with a thickness of 2-3mm and a diameter of 200mm. A compass knife is used to cut lenses between 3-6mm in diameter and 100-1000mm.
(3) Construction conditions
The surface of the grassroots level has been completed and passed the handover inspection. There is a certain operating site on the site. All decorative materials have been prepared and stacked close to the operation. Electrical circuits have been introduced and equipment has been prepared.
Installation and construction
I. Glass office partition structure
Commonly used glass materials include flat glass, frosted glass, pressed glass, and stained glass. The glass type and thickness chosen are determined by design.
2. Structural points
The lower part of the glass partition is mainly designed according to design requirements. Generally, there are cover panels, slat walls, plastering and flat brick walls.
Main points of installation and construction technology
(1) According to the design size, a vertical line is popped on the wall, and a partition is popped up on the ground and the ceiling.
(2) According to the requirements of the drawing, make the lower half (cover panel, slat or brickwork) on the position line that has been ejected and anchor it with the structure (brick wall or column) at both ends.
(3) Complete the installation of the upper partition. The installation sequence is:
① Check whether the wooden bricks on the brick wall have been laid according to regulations;
② According to the position of the pop-up line, first stand against the wall, and nail it with the wooden brick on the wall;
③ Then nail the upper and lower chin and the middle corrugated wood.