Suzhou Gansu Glass Products Co., Ltd.
Contact: Xie Bin
Address: Building 1, West Side of Provincial Road 227, Xinzhong Village, Xinzhuang Town, Changshu City, Suzhou
Partitions are a very common decoration layout, but many people do not pay attention to maintenance after decoration, and many problems have occurred for a long time. With the increasing use of office partitions, how to maintain glass office partitions?
The maintenance of glass partitions must not only pay attention to the precautions during the decoration process, but also more importantly the later maintenance and maintenance, so as to increase the service life of the partitions and avoid the inconvenience caused by maintenance. For the maintenance and maintenance of partitions, pay attention to protect the partitions when installing the partitions, and fix them firmly to prevent the partitions from being scratched during the construction process. Handle them with care when transporting the partitions and do not damage the partition. In daily use, keep the partition clean and tidy. Do not hang items on the partition. Clean the partition regularly or irregularly. Partitions of wooden materials should also pay attention to waterproof and moisture-proof measures to avoid partition rupture caused by wood decay. Avoid squeezing or hitting the partition with heavy objects to prevent the partition from being unstable and unstable. Insulating glass Ecuador should make the original properties of the glass glue, do not let the glue dry or lose its viscosity, pay special attention to the sealing effect to prevent water or dust from falling into the hollow part, causing the partition stains to be difficult to remove.
The following points about the maintenance of office partitions are more important:
1. Do not use sharp objects to directly cut, cut, or hit the exterior of the high compartment wall to avoid leaving scratches, cracks and grooves on the exterior.
2. All standard panels except cloth panels can be cleaned. When cleaning, do not choose sanitary agents with abrasives and strong acid components to avoid damaging the appearance.
3. Dirty-finishing claims to remove or reduce the dirt, please use full-effect sanitary agents or other gentle sanitary agents, dry the sanitizer with a soft damp cloth, and then wash with water.
4. The rubber strip is the key to ensuring that the aluminum alloy glass is hermetically sealed, soundproof and waterproof. If it is dropped, it must be repaired and replaced in time.
5. The aluminum alloy glass partition can be scrubbed with a soft cloth moistened with water or a neutral detergent. Do not use general panyu and washing powder, nor use strong acid and alkali sanitizers such as detergent powder and toilet detergent.
6. During the use of aluminum alloy glass partition, it should be gently pushed and pulled, and the push and pull should obey its installation method;
7, aluminum alloy glass interval accumulation of dust, deformation is the main reason for aluminum alloy interval aging, we must adhere to aluminum alloy hygiene, especially the splicing seam hygiene. Use a vacuum cleaner to remove the dust in the tank and the rubber strip.
The good maintenance of the glass partition in the office can increase the partition's service life, and also maintain the firmness of the partition to ensure human safety. The importance of maintenance and maintenance of office partitions can save repair time and the cost of replacing partitions.